Jim Thorpe

Jul 062012
 

Angle grinders are incredibly versatile power tools which can be used any many projects that you might end up doing. The ability to change things up with the equipment in order to get different results makes this piece of machinery something that should be owned.

These units are going to be much more effective if they are used in an efficient and controlled manner. The key to getting good results with an angle grinder is knowing the best ways to use it, and when to change things up based on what you are doing.

Basic models usually are able to accept three basic modification types- grinding pads, sanding pads, and saw blades. Swapping out these pieces is very simple- all you have to do is use the provided tool in order to swap them out on the spot.

Make sure that you talk to your management about getting the training that you are going to need for the equipment. Attend the trainings and make sure that you also attend any safety trainings or seminars that you are going to need to be able to work well with the machine.

When you are working with the edges of metal pieces, such an attachment is invaluable, because you can smooth and shape an edge to fit or be safer. If you work on projects with any frequency, such an ability in itself can make the equipment worthy of a purchase.

Sanding pads will be used in order to scour surfaces and allow them to be painted or surfaced. These are usually used on metal as well, but their abilities can also be used with other materials if necessary.

Before you start working with the machine you should also understand how you are going to dress properly. Dressing properly will ensure that you can minimize the dangerous situations that you are going to be exposing yourself to.

The saw blade attachment can be used for a variety of jobs, such as quickly getting through thinner metal plates to wood to hardened plastics. Essentially, using a very sharp serrated blade on different projects is going to be something that most of us will need to do at some point in time.

Stationary emplacements are also an option to use when there is a project that needs to be worked on. These equipment stands usually have brushes that are of higher strength and quality than their handheld siblings.

Make sure that you understand how you are going to get yourself into this state before work. You should never operate heavy machinery when you have drugs in your system, you are under the influence of alcohol or you are taking a medication that makes you drowsy or will affect your reaction time.

Learning to navigate heavy machinery well is important. Take time to learn the process to ensure you and your coworkers are always going to be safe.

Jorgenson Machine Toolsoffers a large stock of new & used machine tools, fabricating and sheet metal equipment.We sell and service all types of metalworking equipment, including press brakes, shears, saw, plate rolls and ironworkers.We are the select US importer for Durma plate rolls, anglerollsand saws and the exclusive importer of Krras press brakes and shears.

Jun 272012
 

Angle grinders are incredibly versatile power tools which can be used any many projects that you might end up doing. The ability to change things up with the equipment in order to get different results makes this piece of machinery something that should be owned.

Wire brushes are special strands of wire which are used in order to add an abrasive effect. When the equipment is powered, the brush will spin around at very rapid speeds, allowing it to work quickly and effectively.

Basic models usually are able to accept three basic modification types- grinding pads, sanding pads, and saw blades. Swapping out these pieces is very simple- all you have to do is use the provided tool in order to swap them out on the spot.

Make sure that you talk to your management about getting the training that you are going to need for the equipment. Attend the trainings and make sure that you also attend any safety trainings or seminars that you are going to need to be able to work well with the machine.

You want to make sure that you understand how you are supposed to react in emergency situations. In many settings, when you are dealing with heavy machinery, your safety and the safety of those around you will depend on your reaction when faced with specific situations.

Sanding pads will be used in order to scour surfaces and allow them to be painted or surfaced. These are usually used on metal as well, but their abilities can also be used with other materials if necessary.

Before you start working with the machine you should also understand how you are going to dress properly. Dressing properly will ensure that you can minimize the dangerous situations that you are going to be exposing yourself to.

The saw blade attachment can be used for a variety of jobs, such as quickly getting through thinner metal plates to wood to hardened plastics. Essentially, using a very sharp serrated blade on different projects is going to be something that most of us will need to do at some point in time.

In order to work safely with the angle grinder, it is strongly recommended that people sue the right protective gear. Since the equipment has a habit of kicking up sparks and sharp fragments from what it is being applied to, protective gloves and eye protections should be the minimum when it comes to safety wear.

If you are assembling something painstakingly and piece by piece, this may be the better option for you. No matter what, the presence of the tools is going to make a positive difference when it comes to the results which are achieved.

Learning to navigate heavy machinery well is important. Take time to learn the process to ensure you and your coworkers are always going to be safe.

Jorgenson Machine Toolsoffers a large stock of new & used machine tools, fabricating and sheet metal resources.We sell and service all types of metalworking equipment, including press brakes, shears, saw, plate rolls and ironworkers.We are the exclusive US importer for Durma plate rolls, anglerollsand saws and the exclusive importer of Krras press brakes and shears.